Sealing slurries / Reactive slurries

This product range offers our customers reactive mineral (cement based) sealing systems, which are depending on their application crystallizing, flexible or highly elastic. One-component and two-component product systems are available.

PT Reactive Slurry Sulphate

Productinformation

PT Reactive-Slurry Sulphate is a cement reactive (special cement), powdered, sulphate resistant, rigid and mineralic sealing slurry with deep penetration additives. PT Reactive-Slurry Sulphate penetrates deep into the substrate and claws onto substrate to achieve a very good bonding to the surface.

Delivery form
  • 25 kg unit, Article-No. 05100025

PT Reactive-Slurry Crystalline

Productinformation

PT Reactive-Slurry Crystalline is a reactive, powdered, active crystalline, rigid cement based sealing slurry with special deep crystallization properties. based on cement and special additives. PT Reactive-Slurry Crystalline penetrates deep into the substrate and claws by active crystallization into the pores of the substrate to achieve a very good bonding to the surface. PT Reactive-Slurry Crystalline retains the crystalizing reaction over the whole working time. Immediately after application the crystallization starts and is permanent working.

Delivery form
  • 25 kg unit, Article-No. 0520025
Technical data sheets

PT Elastic Slurry 2C

Productinformation

PT Elastic Slurry 2C is a two component, hydro active, highly elastic, cement and rubber based sealing slurry with very high rubber content. PT Elastic Slurry 2C consist of a cement based powder component (component A) and low viscous rubber dispersion (component B). Due to the formulation thel slurry is curing without cracks.

Delivery form
  • 21 kg combi packaging (15 kg bag powder component + 6 kg canister liquid component), Article-No. 05300021
Technical data sheets

PT Multi-Hybrid Coating 2C

Productinformation

PT Multi-Hybrid Coating 2C is a two component, hydro active, highly elastic, mineralic/rubber based special coating (FBD) with very high rubber content. PT Multi-Hybrid Coating 2C consist of a powder component (component A) and low viscous rubber dispersion (component B). Due to the formulation PT Multi-Hybrid Coating 2C is curing without cracks. Additionally PT Multi-Hybrid Coating 2C is bitumen and solvent free, universal usable as a reactive waterproofing system. The coating combines the positive properties of a flexible sealing slurry and bitumen thick coating in one product.

Delivery form
  • 25 kg combi packaging (15 kg powder component + 10 kg liquid component), Article-No. 05400025
Technical data sheets