Restoration plasters

This product range offers our customers products for the rehabilitation of salt-damaged surfaces in the restoration of buildings. In addition, they are also used for refurbishment on facades.

PT Restoration Plaster W

Productinformation

PT Restoration Plaster W is based on very special additives and white cement with high vapor permeability and large pore volume. Due to the low capillary absorbency (hydrophobic pores) the moisture from the substrate can only penetrate in the restoration plaster in water vapor form. Construction damaging salts will be absorbed in the pores of PT Restoration Plaster W. Therefore the plaster surface is free of salt efflorescence. PT Restoration Plaster W complies with the technical requirements of WTA Guideline 2-9-04.

Delivery form
  • 20 kg bag, Article-No. 12110020
Technical data sheets

PT Restoration Plaster HQ

Productinformation

PT Restoration Plaster HQ is a multi functional, fiber reinforced and on white cement based dry mortarwith high vapor permeability and large pore volume. Due to the low capillary absorbency (hydrophobic pores) the moisture from the substrate can only penetrate in the restoration plaster in water vapor form. Construction damaging salts will be absorbed in the pores of PT Restoration Plaster W. Therefore the plaster surface is free of salt efflorescence. PT Restoration Plaster White complies with the technical requirements of WTA Guideline 2-9-04. The hydrophobic property (proof-tec HQ Technology) starts very fast, which leads to a high product safety. The hydrophobization can be observed during the plaster has not reacted. That means within curing time of plaster no salts can penetrate into the plaster.

Delivery form
  • 20 kg bag, Article-No. 12110020
Technical data sheets

PT Restoration Plaster Coating

Productinformation

PT Restoration Plaster Coating is a white very fine, cement based dry mortar according DIN EN 998-1. It content very special grain size (0.4 mm) which leads to a very smooth surface of the coating.

Delivery form
  • 30 kg bag, Article-No. 12140030
Technical data sheets

PT Pre-Plaster

Productinformation

PT Pre-Plaster is a mineral, sulphate resistant, fast setting dry mortar. The Product is a part of PT Restoration Plaster System. Due to a higher grainl size in comparision to other mortar systems, the pre-plaster increases the surface structure. PT Pre-Plaster is according technical values of WTA guideline 2-9-04/D.

Delivery form
  • 25 kg bag, Article-No. 12500025
Technical data sheets

PT Anti-Mold Plaster

Productinformation

PT Anti Mold Plaster is a fiber reinforced and on white cement based dry mortar with high vapor permeability and large pore volume. Due to the low capillary absorbency (hydrophobic pores) the moisture from the substrate can only penetrate in the restoration plaster in water vapor form. The completely cured plaster is alkaline and therefor mold cannot grow on the surface.  The plaster surface is free of salt efflorescence. PT Anti Mold Plaster complies with the technical requirements of WTA Guideline 2-9-04. The hydrophobic property (proof-tec HQ Technology) starts very fast, which leads to a high product safety. The hydrophobization can be observed during the plaster has not reacted.

Delivery form
  • 20 kg bag, Article-No. 12150020
Technical data sheets